Total Floor Prep Solutions
Concrete Floor Grinding
Flat, clean concrete surfaces prepared to install, without rework or delays
Uneven concrete, adhesive residue, coatings, or surface contamination will compromise any new floor. Concrete floor grinding corrects the slab before installation, so flooring systems bond properly and meet tolerance requirements.
Total Floor Prep Solutions delivers professional concrete floor grinding focused on accuracy, dust control, and installer-ready results, no shortcuts, no patch fixes.
When Concrete Floor Grinding Is Required
How Our Concrete Floor Grinding Works
What Grinding Solves
Concrete Floor Grinding– FAQs
Concrete floor grinding is a mechanical surface preparation process that removes high spots, coatings, glue residue, and surface contamination from a concrete slab. The goal is to produce a flat, clean surface suitable for new flooring or coatings.
Grinding is typically required when:
Tile glue, paint, epoxy, or membranes remain on the slab
The concrete has uneven or raised areas
Flooring installers require tighter flatness tolerances
Manufacturer installation guidelines specify mechanical preparation
If the slab isn’t clean and level, most installers will not proceed.
No. Concrete grinding is controlled and precise. Material is removed only where necessary to correct surface issues while maintaining the structural integrity of the slab.
We use minimal-dust grinding methods with H-Class vacuum systems to capture fine particles during the process. While no grinding method is completely dust-free, this significantly reduces airborne dust compared to uncontrolled grinding.
Most residential grinding jobs are completed within one day, depending on:
Floor size
Surface condition
Amount of residue or unevenness
Larger or commercial areas may require additional time, which is confirmed upfront.
Yes. Once grinding and clean-up are complete, the slab is ready for immediate installation unless additional services such as levelling or coatings are required.
No. Grinding removes high spots and surface material. Floor levelling fills low areas using compounds. In some cases, both services are required to achieve a fully compliant surface.
If installers have raised concerns about glue residue, uneven concrete, or surface condition, grinding is usually the solution.
Total Floor Prep Solutions can assess the slab and confirm the correct approach before work begins.